8 common causes of low water pressure
Low water pressure happens when there is not enough water coming out of your faucets and showerhead. Sometimes it can be a big problem and other times it's more of an annoyance or inconvenience.
There are a lot of reasons that contribute to low water pressure in your home. The first thing you need to do is determine if the problem lies with the water feed, which is the outside pipe connection, or the interior house plumbing.
Here are some common causes of low water pressure
Measures to take if you are experiencing low water pressure
Investing in a water pressure booster pump
Low water pressure problems could also be attributed to how your plumbing systems are designed and installed. For instance, people occupying flats in storey buildings are prone to low water pressure issues.
Investing in a water pressure booster pump is a great way to solve low water pressure issues, especially if your house is located in a place where the water tables are low or you have to go uphill from the main source of supply.
In addition, you could also opt for backflow prevention assemblies. These devices prevent contamination of the potable water system by ensuring that sources such as drip irrigation and outdoor washing systems are not connected to the potable water system.
Regular maintenance of your plumbing systems can reduce the chances of low water pressure issues.
Chlorine is added to our water supply by water mains to help maintain clean, safe drinking water. When chlorine reacts with organic matter in your home's plumbing system, there are increased chances of residue building up over time.
If you find that you have a chlorine or odour taste in your water, you should flush your cold-water pipes of the main shutoff.
Ideally, this would be accomplished by opening all the faucets in your house at once for 5 minutes and then flushing each individual cold-water fixture and appliance (i.e., washing machine, toilets) before turning on their faucets.
The easiest way to detect the source of hard water is by checking your water meter. If it runs for five minutes without stopping, you likely have a problem with hard water.
It is suggested that you collect between 9-12 litres of this first flush of water and then discard it down the drain (it may damage your plumbing). If the water meter still runs after flushing all fixtures, there's a problem somewhere between the valve and the meter.
Having low water pressure can be extremely frustrating and time-consuming. if this persists find a qualified local plumber to look at your plumbing systems to identify the possible fault and to get it fixed. Don't hold off for too long as water pressure issues can result from leaking pipes which will cause severe long term damage in the long run.